[macascos]

Got it, I had to chose ATMEga328. Thanks!

[macascos]

It seems I had to have each library in its own folder within libraries, not within the ArduinoEthernet. Thanks!

However….

[macascos]

I was following this,

Libraries go into the main Arduino document folder. Here’s some instructions from the Arduino site “To install third-party libraries, create a directory called libraries within your sketchbook directory. Then unzip the library there. For example, to install the Twitter library, its files should be in the/libraries/Twitter sub-folder of your sketchbook folder.”

and I have also tried putting the libraries where you told me.

I have libraries now in both places, but still cannot compile the code.

When I do import library Ethernet, I see no new line at the top like the other libraries. Do you think this might be the issue?

[macascos]

This seems right no?

[macascos]

Would this be the path?

Documents/Arduino/BotanicallsTwitter2/libraries/ArduinoEthernet/EthernetDNS/EthernetDNS.h

[macascos]

I already switched to Arduino 0018, still get same errors.

[macascos]

I believe I installed all the libraries. They are all in a folder called libraries inside the Botanicalls folder. I imported them using Sketch/add library

I also added the DHCP files that end .h and cpp.

I erased my Arduino and installed it again.

I get all these errors

In file included from BotanicallsTwitter2.cpp:1:

/Users/marco/Documents/Arduino/libraries/Twitter/Twitter.h:18:17: error: SPI.h: No such file or directory

/Users/marco/Documents/Arduino/libraries/Twitter/Twitter.h:21:25: error: EthernetDNS.h: No such file or directory

BotanicallsTwitter2.cpp:33:138: error: EthernetDHCP.h: No such file or directory

In file included from BotanicallsTwitter2.cpp:1:

/Users/marco/Documents/Arduino/libraries/Twitter/Twitter.h:29: error: cannot declare field ‘Twitter::client’ to be of abstract type ‘Client’

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:7: note: because the following virtual functions are pure within ‘Client’:

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:12: note: virtual size_t Client::write(uint8_t)

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:13: note: virtual size_t Client::write(const uint8_t*, size_t)

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:14: note: virtual int Client::available()

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:15: note: virtual int Client::read()

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:17: note: virtual int Client::peek()

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:18: note: virtual void Client::flush()

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:10: note: virtual int Client::connect(IPAddress, uint16_t)

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:11: note: virtual int Client::connect(const char*, uint16_t)

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:16: note: virtual int Client::read(uint8_t*, size_t)

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:19: note: virtual void Client::stop()

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:20: note: virtual uint8_t Client::connected()

/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Client.h:21: note: virtual Client::operator bool()

BotanicallsTwitter2.cpp: In function ‘void setup()’:

BotanicallsTwitter2.pde:-1: error: ‘EthernetDHCP’ was not declared in this scope

BotanicallsTwitter2.cpp: In function ‘void loop()’:

BotanicallsTwitter2.pde:-1: error: ‘EthernetDHCP’ was not declared in this scope

[Author]

Posts