No LED Indicators on Power Up

Home Forums Botanicalls Community No LED Indicators on Power Up

This topic contains 0 replies, has 2 voices, and was last updated by  Kate 10 years, 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1359

    jordanberkowitz
    Participant

    I’ve recently powered up my botanicals for a test and while the XPort is showing power indicators, the yellow LED on the board does not light up.

    #1696

    Kate
    Member

    The yellow LED only lights up when a message is being sent. Does it light up when you press the “test” button? If it lights and then goes out, it means your tweet has gone through successfully. If it lights and then blinks, it means there was a communication error and the tweet did not go through.

    If tweets are going through but the yellow LED never lights up, it’s possible that the LED is soldered in backwards. You want to make sure the positive leg of the LED, the anode, goes through the hole marked “+”. You can see here how to identify which side is positive.

    Check those things, let us know how it goes, and we can take it from there!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.



New kits are here!

Categories

Pothos Plant Tweets

    Flickr Feed

    www.flickr.com
    More photos or video tagged with botanicalls on Flickr

    Meta