Arduino + Botanicalls + Leopard connection problem

Home › Forums › Botanicalls Community › Arduino + Botanicalls + Leopard connection problem

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 17, 2009 at 6:13 pm #1384
    Neto
    Participant

    I have everything working but still unable to connect to arduino on my Leopard MBP.

    I set the board to Arduino NG or older w/ATMega168

    But I just got 4 serial port options and all of them are Bluetooth related.

    Any tips?

    August 17, 2009 at 7:34 pm #1746
    Rob Faludi
    Keymaster

    What cable are you using. Did you load the FTDI drivers if you are using the FTDI cable?

    October 24, 2010 at 12:55 pm #1747
    meik76
    Participant

    I have the same problem. I have the latest driver installed (coming with the arduino.dmg) and using arduino IDE 0021 and a sparkfun ftdi 3.3v. As long as the ftdi is hooked to usb only the ide seems to recognize the usb-port. when I connect the leaf, usb-port disappears in the concerning menu. Any ideas?

    October 24, 2010 at 2:18 pm #1748
    meik76
    Participant

    It turned out, that the ftdi board from sparkfun didn’t work well. A simple cabel is better and works proper! Fortunately a friend of mine had a cable by accident – otherwise it would have taken some days to order one. Definetly good to know BEFORE you reed the customizing information on the website…

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.


New kits are here!

Categories

Pothos Plant Tweets

    Flickr Feed

    www.flickr.com
    More photos or video tagged with botanicalls on Flickr

    Meta

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.